MORE INFORMATION?
+65 62252238
info.group@gardien.com
International
Menu

GUDMB_A

GUDMB_A

Double Density

25.6″ x19.7″ / 650mm x 500mm

Inquiry
+65 62252238

Large test size

Automation and Interleaf handling
available as option

Available as Quad Density

Compatible with most universal grid
tester formats reusing existing fixture
solutions

Camera alignment option
available

CE certified

Top to bottom alignment – to manage occasional
misalignment and increase efficiency

OTHER EQUIPMENTS

GUDAAI (DD)
GUDAA (DD)
GUDMM_A (DD)
GUDMB_A (DD)
GUDMM (DD)
GUDMB (DD)

GUQAAI (QD)
GUQAA (QD)
GUQMM_A(QD)
GUQMB_A(QD)
GUQMM(QD)
GUQMB(QD)

GUECAAII(OD)

Send Enquiry
  • Test System
  • Electronics
  • Options
  • Dimensions & Enviornmental Conditions
  • Included in Shipment
Operating Interface LanguageEnglish, German, Chinese, Japanese
Grid Density70 mil (DD)
Test points98,304 per side ((196,608)
Electronic Test Speed4,096 TP/s
Test Area12.8” x 9.6”325mm x 244mm
Test Board Size min.2” x 2”50mm x 50mm
Test Board Size max.16.0" x 12.8"406 mm x 325 mm
Test Board Thickness Automatic Mode0.6 mm - 5.0 mm
Test Board Thickness Manual Mode0.2 mm - 10.0 mm
Defect SortingAutomatic Mode: Good / Bad Stacker
Fixture Spec3.75" height, smallest test pin 0.15 mm
Net List FormatKM_SEU Format, or any other 3.75" test format
Defect Confirmation / repair software
connectivity 		Ucam FaultStation

 

Test voltage50V - 300V
Test current20mA (max.)
Continuity test10Ω-1000Ω
Isolation test1MΩ-100MΩ
Power supply380 V, 3-phase, 5Wire (5KW)

 

BR Test Option

 

Width136,61"3470 mm
Depth46,85"1190 mm
Height68,5"1740 mm
Weight5621,78 lbs2550 kg
Air pressure5,8 - 7,8 bar dry and oil free
Air humidity50-65% not condensing
Operating temperature68- 77 °F20 - 25 °C

 

CAR Software

 

Click Here To Open the Flyer
Send Enquiry
GARDIEN
Gardien is uniquely positioned to support
international fabricators with their quality assurance needs as we operate on a global basis, but with a local presence.
Twitter Linkedin
CONTACT
Group Headquarters
+65 6225 2238
info.group@gardien.com
Locations
REGIONAL WEBSITES
North America
Germany
China
Japan
Taiwan
Copyright ©2021 Gardien
Terms and Conditions
Privacy Policy
Anti-Corruption & Bribery Policy
Whistleblower Policy
Site Designed By Radon Media

Get In Touch!

KEVIN SYVRET

FINANCE DIRECTOR, NORTH AMERICA

Mr. Syvret joined Gardien Services Canada as Financial Controller in 2001 and assumed the role of Finance Director North America in 2007. Over the past 20 years, Mr. Syvret has held senior finance and accounting roles, including with Canadian Pacific Ltd and Sprint Inc.

NIRAJ PATEL

VICE PRESIDENT, GARDIEN NORTH AMERICA

Mr. Niraj Patel joined the company on a part time basis in 1993 while attending college full time. He worked in various positions until he graduated from the Centennial College Computer Systems Technology program, whereupon he was hired full time. He progressed through several testing and CAM department positions and was appointed North American CAM Manager in 1998. After 18 years with the company, Mr. Patel was promoted to Senior Vice President of Operations, Gardien Services Canada Inc. in 2011. In January, 2015 Mr. Patel became Vice President NA of the newly combined organizational unit North America which includes the Canada and USA.

TODD KOLMODIN

VICE PRESIDENT QUALITY, NORTH AMERICA

Mr. Todd Kolmodin, a native to the Pacific Northwest was born in Seattle Washington. At a young age he moved to the Portland Oregon area. In March of 1986 he graduated from ITT Technical Institute with a degree in Electronics Engineering Technology. Todd began his tenure in the Electrical Test field that same year.  Todd spent eight years working in an independent testing facility in Wilsonville Oregon where he built skills in all aspects of Electrical Test and Quality Assurance. 

Todd then spent a short term with Yamamoto Corporation on their Engineering staff covering PCB drill, finishing and Electrical Test before joining Probe Test Fixtures in 1995. His charge was CAM and Fixuring Manager.  Todd joined the Gardien Group in September 1998 continuing the same roll and taking on the responsibilities of Quality Manager for Oregon operations. In 2008 Mr. Kolmodin was promoted to Vice President Quality USA. In this position Mr. Kolmodin oversees and maintains the Gardien ITAR registration, ISO Multi-Site registration and multiple site Lab Suitability with the Defense Logistics Agency Land and Maritime. Now also maintaining the Gardien QMS system Todd now serves as Vice President Quality North America.

Mr. Kolmodin is also a published columnist and Technical Presenter with multiple appearances at the IPC Apex Expo Conferences in both San Diego and Las Vegas. 

ROLAND VALENTINI

CHIEF OPERATING OFFICER

Mr. Valentini was appointed COO in July 2010 after successfully serving as head of North American operations since 2005.

Roland has over ten years’ experience in the PCB industry, including sales, service, and project management at Atotech GmbH, Germany mainly relating to PCB plating equipment.
He has significant sales experience from his tenure at Mack Rides GmbH and headed up worldwide installations for Lurgi Bischoff GmbH.

Mr. Valentini received a Master’s Degree in Mechanical Engineering from the University of Mannheim, Germany.

RICHARD HORSMAN

EXECUTIVE CHAIRMAN

Prior to Richard joining Gardien in September 2014, he was Chairman/CEO of tool chain vendor Atego Group Systems Limited which was sold to PTC Inc.

Prior to joining Atego, Richard held a number of Executive and Non-Executive roles including Senior Independent Non-Executive Director of Plethora Solutions, an AIM listed Pharmaceutical Company and CEO of AIM listed Cybit Holdings plc. where he grew the company from inception to revenues of over 25 million and took the company through multiple acquisitions before managing a sale of the business to Francisco Partners.

Richard previously held a number of senior roles in the Software industry.

RICK MERAW

GROUP VICE PRESIDENT QUALITY

Mr. Meraw was appointed Group Vice President of Quality in Jan 2015 after successfully  serving as Senior Vice President of USA operations since 2011.  Prior to being responsible for USA operations Mr Meraw was responsible for Canadian operations since 2001.

Rick has over twenty years’ experience with Gardien Group and has various roles including, service technician, customer liaison, Quality manager, technical support, project management, and software design/ implementation.

In June 1992 he graduated with an Electronic Engineering Technologist degree, with honors from a local community college.

Our People

FINANCE DIRECTOR, NORTH AMERICA

Kevin Syvret

VICE PRESIDENT, GARDIEN NORTH AMERICA

Niraj Patel

VICE PRESIDENT QUALITY, NORTH AMERICA

Todd Kolmodin

Location

Gardien USA Hub Office

Gardien Services USA Inc. PO Box 963 Midlothian, TX 76065 USA

+1 (503) 430 8980

info.us@gardien.com

Gardien Canada Hub Office

Gardien Services Canada Inc. 79 Milliken Blvd. Unit 4 Toronto, Ontario Canada M1V1V3

+1 (416) 292-0726

info.ca@gardien.com

Toronto, Canada

79 Milliken Blvd. Unit 4 Toronto, Ontario Canada M1V1V3

+1 (416) 292-0726

info.tor@gardien.com

Anaheim

1191 N Red Gum Street Anaheim, CA 92806 USA

+1 (714) 630 4600

info.anh@gardien.com

Denver

1513 Taurus Ct. Loveland, CO 80537 USA

+1 (303) 527 1200

info.den@gardien.com

Minneapolis

14000 25th Avenue North Suite 112 Plymouth, MN 55447 USA

+1 (763) 249 1102

info.mnp@gardien.com

Prescott

1600 Orrin Rd Prescott, WI, 54021 USA

+1 (715) 262 5898

info.pre@gardien.com

Our People

CHIEF OPERATING OFFICER

Roland Valentini

EXECUTIVE CHAIRMAN

Richard Horsman

GROUP VICE PRESIDENT QUALITY

Rick Miraw

Locations

Group Headquarters

Gardien (SEA) Pte Ltd 105 Cecil Street. #16-01, The Octagon (Suite 1613) Singapore, 069534

+65 6225 2238

info.group@gardien.com

ROLAND VALENTINI

CHIEF OPERATING OFFICER

Mr. Valentini was appointed COO in July 2010 after successfully serving as head of North American operations since 2005.

Roland has over ten years’ experience in the PCB industry, including sales, service, and project management at Atotech GmbH, Germany mainly relating to PCB plating equipment.
He has significant sales experience from his tenure at Mack Rides GmbH and headed up worldwide installations for Lurgi Bischoff GmbH.

Mr. Valentini received a Master’s Degree in Mechanical Engineering from the University of Mannheim, Germany.