G80 Specifications


Number of test probes 4 (2 front/2 back) High speed Z-Axis probes with soft touch (requires soft touch probes)
Test probe pressure 2 -10 g
Number of CCD-cameras 2 (1 front/1 back) Fully automatic camera alignment for easy and fast compensation of board registration
Max test area (x/y) 28.7” x 24.8” 730mm x 630mm
Min board size (x/y) 2” x 2” 50mm x 50mm
Max board thickness 320mil 8mm
Min board thickness (standard) 5mil 0,12μm
Repeatable accuracy +/- 0.3mil 7,5μm
Resolution (x/y) +/- 0.3mil 7,5μm
Smallest testable pad size 2mil 50μm
Smallest testable distance/pitch 3mil 75μm
Board Loading Stretch/ Quick Frame


Test voltage 20 V up to 1000 V (adjustable)
Test current 5 mA up to 500 mA (adjustable)
Continuity test 1 Ω up to 5000 Ω (dependent on the current, smaller current = larger resistance)
Isolation test 1 M Ω up to 500 M Ω


Operating Software Windows 10 (English Version)
User Interface Gardien FPX with multi Language support (Chinese, Japanese, English, German, Spanish)
Data input formats


Test Floor Integration IT based communication and data exchange between Universal Grid, Flying Probe and Fault verification SW


Multi Board Loading
(Quick frame)
4Wire Kelvin Measurement (Low Ohm measurement)
Electrical stretch fame –  no compressed air connection required
Embedded resistor test  
Embedded capacitor test  
Data preparation software (Certified Ucamco)  
Verification software (Certified Ucamco)  
Test Floor Integration (TFI) capability  

Dimensions & Environmental conditions

Width 86.6" 2200mm
Depth 38.5" 980mm
Height 76" 1940mm
(without light)
  84.4" 2155mm (with light)
Weight 2866lbs 1300kg
Air humidity 45-65% - not condensing
Room temperature 64°-90 °F 18-32 °C
Power supply 230V, 50/60Hz, 1000W Single phase

Click here to open the flyer