Michael Müller, General Manager at Polytron Print GmbH in Bad Wildbad, Germany
For whom it may concern,
Polytron Print is now also testing with Gardien’s tester in Bad Wildbad.
Polytron Print has installed a novel automatic test system that can significantly increase the productivity of printed circuit board electrical testing in Bad Wildbad
With a grid density of 70 μm, even complex printed circuit boards are tested for short circuits and interruptions. The plates are stored separately according to the test result.
To be able to react to slight misalignment from top to bottom of the PCB, the lower pressure unit can be aligned with stepper motors.
The data for testing is provided by Gardien as a service. Polytron print also receives the data to manufacture fixture in Bad Wildbach and the fully assembled fixture can also be obtained if required.
It was particularly important for Mr Mueller, owner of Polytron Print that they could also integrate their existing fixtures into the machine and guarantee a German-language service through the Gardien branch in Limburg.
The experience of over half a year of production experience with the Kaima GUDAA proves how sophisticated, flexible and powerful the device is and that the expected throughput optimization has arrived.
– Michael Müller Managing Director of Polytron Print GmbH Bad Wildbad, Germany